Notifications
Clear all
Topic starter
08/09/2020 10:25 pm
Hello there
Can anyone guide me to the following: if the COB is replaced as a possible 1301 fault, are there any more actions to be done, so the board can
be found by the network ? or is it plug n play
Can anyone guide me to the following: if the COB is replaced as a possible 1301 fault, are there any more actions to be done, so the board can
be found by the network ? or is it plug n play
09/09/2020 2:09 am
you replaced the cable first. which is connected to COP to the Maintenance box.
09/09/2020 3:55 am
Could be mul board, dob, cable
I have had bad button or switch cause 1301 fault.
If you replace mul board you have to do a 5:7:1
I have had bad button or switch cause 1301 fault.
If you replace mul board you have to do a 5:7:1
Topic starter
09/09/2020 4:35 pm
Thank you. Will follow your tips. I am no familiar will terminology so 5:7:1, you mean goto menu 5 sub. 7 and set to 1 ( LON download) ?
Topic starter
09/09/2020 4:37 pm
refering to the button probabillity, i remeoved all buttons to cancel this out.