Notifications
Clear all
Topic starter
23/06/2021 10:47 am
We have KONE MRL EchoSpace with a V3F25S Drive and V3FNTS board. We are looking for the procedure to Test NTS. Our current documentation says to set the ADON UI to 6-72-7. The highest our UI house is 6-72-5. Does anyone know the procedure to test NTS with a V3F NTS board??
23/06/2021 9:23 pm
Your mail addresse ?
23/06/2021 9:47 pm
RealTimeDisplay signals (selectable with 6_75)unitcomment
Speed and position:
1. Speed from motor resolverm/s
4. Position from motor resolverm
7. Distance to next floorm
13. HAC distancem
14. Midpoint information-1 = above midpoint, 0 = below midpoint
Motion control
20. Velocity referencem/s
25. Motor current referenceA
27. KTW/Q estimate-(estimate for parameter 6_29)
Temperatures:
40. heatsink
Other information:
62. Power up timerhTimer restarts at powerup.
63. Power down counter-Number of powerdowns (24V)
64. Communication error counter-Number of timeouts
Speed and position:
1. Speed from motor resolverm/s
4. Position from motor resolverm
7. Distance to next floorm
13. HAC distancem
14. Midpoint information-1 = above midpoint, 0 = below midpoint
Motion control
20. Velocity referencem/s
25. Motor current referenceA
27. KTW/Q estimate-(estimate for parameter 6_29)
Temperatures:
40. heatsink
Other information:
62. Power up timerhTimer restarts at powerup.
63. Power down counter-Number of powerdowns (24V)
64. Communication error counter-Number of timeouts