Elevator Forum

Notifications
Clear all

Hydraulic MRL

15 Posts
7 Users
0 Reactions
9,976 Views
(@montana)
Honorable Member
Joined: 17 years ago
Posts: 515
Topic starter   [#29112]
Can anyone lead me to an independant non-proprietary elevator manufacturer who can supply me with an elevator that would meet this SPEC?

Elevator 1: Machine room-less hydraulic elevator. The entire hydraulic system and the controller shall be located inside the hoistway. No extra machine room or control space
1. Model: 3 stage
2. Rated Capacity: 2500 lbs.
3. Rated Speed: 150 ft. /min.
4. Travel: 30'-0''
5. Landings: 3 total
6. Openings: Front, 3
7. Clear Car Inside: 6’-8” x 4’-3”
8. Cab Height: 8’ standard
9. Hoistway Entrance Size: 3'-6'' wide x 7'-0'' high
10. Door Type: Single Speed, Center Opening
11. Power Characteristics: 208 volts, 3 Phase, 60 Hz.
12. Pit Depth: 4-0”
13. Hoistway Dimensions: As shown on drawings, Contractor to verify with manufacturer.

Elevator 2: Machine room-less hydraulic elevator. The entire hydraulic system and the controller shall be located inside the hoistway. No extra machine room or control space is required.
1. Model: 3 stage
2. Rated Capacity: 4000 lbs.
3. Rated Speed: 150 ft. /min.
4. Travel: 30'-0''
5. Landings: 3 total
6. Openings: Left Front, 3
7. Clear Car Inside: 7’-8” x 5’-5”
8. Cab Height: 8’ standard
9. Hoistway Entrance Size: 4’-0” wide x 7'-0'' high
10. Door Type: Single Speed, Center Opening
11. Power Characteristics: 208 volts, 3 Phase, 60 Hz.
12. Pit Depth: 4-0”
13. Hoistway Dimensions: As shown on drawings, Contractor to verify with manufacturer.

Controller: Shall be integrated in a hoistway entrance jamb. The elevator control system shall be microprocessor based and software oriented, together with all relays, switches, solid-state components and hardware required for operation.



   
Quote
(@bills)
Estimable Member
Joined: 17 years ago
Posts: 81

   
ReplyQuote
(@justwolf)
Estimable Member
Joined: 17 years ago
Posts: 144
 
I don't think you are going to get a good answer here. That is because elevator people don't like MRL's. If I can't touch it or see it, I, myself don't want it...



   
ReplyQuote
(@montana)
Honorable Member
Joined: 17 years ago
Posts: 515
Topic starter  
Haha, I'm totally with you on that JustWolf. I do not like working on MRL's. I try to convince architects not to SPEC them but it falls on deaf ears. I have to bid to the SPEC and this is the SPEC. Looking like TKE or The Big O will be their only choice. SMH.



   
ReplyQuote
(@montana)
Honorable Member
Joined: 17 years ago
Posts: 515
Topic starter  
Thanks BillS. I sent a message to Delaware Elevator and haven't heard back yet. It's starting to look like TKE's Endura 3-stage is the only option for a 30' rise.



   
ReplyQuote
(@bills)
Estimable Member
Joined: 17 years ago
Posts: 81

   
ReplyQuote
 ABE
(@abe)
Reputable Member
Joined: 17 years ago
Posts: 338

   
ReplyQuote
(@elevatorguy128)
Estimable Member
Joined: 17 years ago
Posts: 101
 
Heard Canton is doing one as well but haven't seen anything on it and theyve been talking for a while now about it....We did an Alliance MRL package but it was traction (wouldn't recommend it - bunch of issues regardless of traction or hydro). Typically if a contractor really pushes us for a bid on a project that has MRL specs we usually push back hard on it and offer a typical package (holeless, in ground, or roped hydro) and if they really don't want it then we ignore the bid request, just not worth it with the big boys having the upper hand as far as MRL installs go.



   
ReplyQuote
(@montana)
Honorable Member
Joined: 17 years ago
Posts: 515

   
ReplyQuote
(@montana)
Honorable Member
Joined: 17 years ago
Posts: 515

   
ReplyQuote
(@chainring)
Trusted Member
Joined: 17 years ago
Posts: 40
 
If you are a building owner, you should avoid an MRL like the plague. If you are sourcing on behalf of a building owner, you should avoid an MRL like the plague.



   
ReplyQuote
(@montana)
Honorable Member
Joined: 17 years ago
Posts: 515

   
ReplyQuote
(@jblack83)
Estimable Member
Joined: 17 years ago
Posts: 143

   
ReplyQuote
(@montana)
Honorable Member
Joined: 17 years ago
Posts: 515

   
ReplyQuote
(@montana)
Honorable Member
Joined: 17 years ago
Posts: 515

   
ReplyQuote
Share:
Scroll to Top