Elevator Forum

Sheet #GS27-4012, date June 3, 1955. GS27- note is -ARR for (2) 68594?? cam devices. Front & Rear ... Rectifier Arranged. The GS27 in this case re...

Sheet #GS27-4012, date June 3, 1955. GS27- note is -ARR for (2) 68594?? cam devices. Front & Rear ... Rectifier Arranged. The GS27 in this case re...

Clean and oil and then check level of switch. If possible adjust coil mounts so the movable core isn't wearing on the inside of the coil. Check for we...

My mistake I am looking for a Otis #3 selector which comes with a SOB controller. Also #3 door locks. Historical building.

There a round cover on the worm drive housing siting at a 45 degree angle. What is the casing stamp on the cover. ie 87 MC 4. On the cable sheeve what...

Your right GreenPants someone put 20amp motor fuses (Dual Element)and some coils did burn. The correct fuses for this controller is (3)5amp one-time, ...

My mistake. The NON-Interference switch, the Aux. Cam switch and the Cam (Cab top) coil are all #103593.

Unitec can help, thanks Vic. Give them the machine #, or for later equipement, the sales #. Found a parts leaflet on Abebooks.com for around a 1927 1-...

FYI The floor coil #'s for Otis sheet #4012, dated July 19, 1920 are #103594. The Non-Interference switch, the Aux. cam and Cam(cab top) coil are all ...

Major elevator go back to the basement door. Problems are reoccurring. If not at least the basement door is good to go.

Talk about the company, try being squeezed financially by the boys when your elevator is down. Thank god for the service techs in the trenches. Never ...

Received the floor coils. Turns out I had a service issue, not a parts issue. Original manufactur had them. They had all the parts, try having that wi...