Elevator Forum

Originally Posted By: aquadag I ask a dumb question. learn run? after you moved sensor. I think the count adjustments are in the hidden mcss parameter...

I was thinking the same idea. The vanes for NTC are on the same vane as the NTB or NTT slowdown. It's a U shaped vane and one side is NTB or NTT and t...

RCD, I think your forgetting that elevator Ring and worm gears have a lead angle to improve efficiency. The sample you've given has no lead angle and ...

Hey Local, are you not able to communicate with the door operator board at all using your IMS or are you able to communicate with the board but just n...

Your Right, this is not the usual. I have a lot of tac 20s and all of them can be programmed through IMS from the machine room. Then one day we picked...

The board I was thinking of was the 6300GE which takes a special programmer. This board is used with some of the older TACs but is stand alone and not...

Whats the part # of the board? Some boards need a special programmer. I had to buy one from World Electronics for a Tac 50 car I had.

Ok, I found out from Manny at Swift. They use a PLC to interface the different controllers to the campus view software through monitoring discrete inp...

Thanks, a consultant was telling me about this monitoring today. I couldn't find any related info on Swift's website. I'm just curious how they are ab...

I believe the main board has the test points for the different power supplies +5, +15, -15. I meant to check if there is AC riding on these filtered p...

Joe, What are you trying to do? You've already created a post above in this topic. Are you trying to do something specific? At the top left corner of ...