Elevator Forum

unattened motion te...
 
Notifications
Clear all

unattened motion test

4 Posts
3 Users
0 Reactions
4,525 Views
(@tkebob)
Active Member
Joined: 17 years ago
Posts: 2
Topic starter   [#22973]
Can you perform a up unattended motion test by putting the elevator on inspection and manually picking the brake on a TAC-50 ?



   
Quote
(@elmcannic)
Honorable Member
Joined: 17 years ago
Posts: 635
 
Not sure about being on inspection, but could the same be achieved on auto with the doors disconnected? Shouldn’t take much.



   
ReplyQuote
(@john-jay)
Prominent Member
Joined: 17 years ago
Posts: 798
 
For unintended movement cat 1 test. Position the car at the landing below the top terminal landing. Simulate a door open condition and release the Brake. Verify the car does not exceed 48 inches of upward movement. For a Cat 5 test, use 125% load at a landing near the Bottom that allows enough movement. Again simulate a door open condition. The car must not exceed 48 inches of downward movement.



   
ReplyQuote
(@elmcannic)
Honorable Member
Joined: 17 years ago
Posts: 635

   
ReplyQuote
Share:
Scroll to Top