Notifications
Clear all
Topic starter
02/11/2015 5:29 pm
After a routine service on a Schindler Smart lift i activated the over travel switch and after switching back yo normal from test the lift will not reset or do a shaft learn, does anyone know the reset procedure as I would be most grateful.
Regards,
Paul
04/12/2015 7:33 pm
1. Turn dip switch 8 on.
2. Wait 3 seconds.
3. Turn dip switch 8 off.
4. Press reset button.
2. Wait 3 seconds.
3. Turn dip switch 8 off.
4. Press reset button.
This will force lift into a manual measuring travel journey and should clear any errors.
If you have any problems let me know.