Notifications
Clear all
Topic starter
07/01/2020 6:45 am
Need help here people.
Have a Schindler 330a. 121 Block ready UNV. EXTRA info x00078. Suspect something with selector. Other problems prior to this final issue caused us to sequentially replace the CRIP board 5Q, CIO board. CPB board. Now we can not get this block error to go away. Elevator is in The pit on The springs. The selector has issue on the MOD B section. Not changing LED for any of those inputs.
Have a Schindler 330a. 121 Block ready UNV. EXTRA info x00078. Suspect something with selector. Other problems prior to this final issue caused us to sequentially replace the CRIP board 5Q, CIO board. CPB board. Now we can not get this block error to go away. Elevator is in The pit on The springs. The selector has issue on the MOD B section. Not changing LED for any of those inputs.
Help me please!
Topic starter
07/01/2020 6:50 am
I have tried the inspection reset. I have tried the hard reset. The triple tap reset. Removed the GCIO and drained the CAP.
Have completely unwired the selector and still have input lights on mu CIO and CRIP boards.
Topic starter
08/01/2020 5:58 am
Someone? Anyone? Help.
08/01/2020 10:14 am
Levelling zone relay isn’t going on and off with klu/kld. Did you swap crip board 5q with a 5q or have relays repaired on that board? I’ve had issues in the past where the relays that were repaired were the wrong type of coil
Topic starter
10/01/2020 7:00 am
Like for like on the CRIP 5Q.