Elevator Forum

Old dover hydro pri...
 
Notifications
Clear all

Old dover hydro prints

11 Posts
8 Users
0 Reactions
8,356 Views
(@elevatorguy128)
Estimable Member
Joined: 17 years ago
Posts: 101
Topic starter   [#31870]
Got a 3 stop in ground dover freight car. No prints on site, had an issue prior to us taking it over with the valve, we are installing a new valve, tank and motor, and starter. Troubleshooting now as it won’t run … data tag on controller says tested in 1966. Also says wiring diagram DW - 8794

Wondering if anyone has a set of those or something similar? Or has any knowledge of this vintage equipment?



   
Quote
(@jluff)
Noble Member
Joined: 17 years ago
Posts: 776

   
ReplyQuote
(@newmech)
Estimable Member
Joined: 17 years ago
Posts: 203

   
ReplyQuote
(@montana)
Honorable Member
Joined: 17 years ago
Posts: 515

   
ReplyQuote
(@elevatorguy128)
Estimable Member
Joined: 17 years ago
Posts: 101
Topic starter  
Installed a new siemens soft start - actually got the motor and starter to work properly but the car won't run. Looking like it's either an issue in the old controller or maybe a hatch switch or something related to safety circuit open. Was hoping to get lucky with prints to try and eliminate something like the safety circuit rather than just shooting in the dark on it.



   
ReplyQuote
 M2RE
(@m2re)
Estimable Member
Joined: 17 years ago
Posts: 82

   
ReplyQuote
 jkh
(@jkh)
Prominent Member
Joined: 17 years ago
Posts: 904
 
Dover had several versions of freight controller around then. Does your unit have relays 1A, TA on the controller? I sent you a PM.



   
ReplyQuote
(@elevatorguy128)
Estimable Member
Joined: 17 years ago
Posts: 101
Topic starter  
Hopefully these pics attached work - not too familiar with uploading pictures here
Attachments
Screenshot_20211008-084031_Gallery.jpg (864.68 KB, 106 downloads)
Screenshot_20211008-084124_Gallery.jpg (576.6 KB, 73 downloads)



   
ReplyQuote
 Rev1
(@rev1)
Trusted Member
Joined: 17 years ago
Posts: 38

   
ReplyQuote
 M2RE
(@m2re)
Estimable Member
Joined: 17 years ago
Posts: 82

   
ReplyQuote
(@lombardb21)
New Member
Joined: 17 years ago
Posts: 4
 
Can you send me the electrical prints also, I have a Dover WRC two stop freight elevator, and need prints that are close

Last edited by Lombardb21; 10/01/25 09:16 PM. Reason: add text


   
ReplyQuote
Share:
Scroll to Top