Notifications
Clear all
Topic starter
30/11/2010 5:45 am
Does anyone know the cab and hall button voltage on Mowery's equiptment. Its the srl stuff. They pulled the prints and most of there boards due to a builder going bankrupt and I would like to qoute it to get it back in operation. I found 2 transformers in what was left of the controller, 1 HAD A SECONDARY VOLTAGE OF 18 AND THE OTHER WAS 8.5V. THANKS!
30/11/2010 6:14 am
Give SRL a call at 1.800.810.3754. They will not sell you any thing for it, but will at least give you the voltage for it. We have a couple on service. I can get the voltage for you if they can not help you out.
10/02/2011 3:34 am
mowery relay logic or solid state? if this is relay logic mowery then the voltage is 120vac which is powered thru term a and x3
if this is solid state mowery(emac or omiron c20) then the voltage is 24vdc which is powered thru term 4 and 5 hope this helps i see im a bit late
if this is solid state mowery(emac or omiron c20) then the voltage is 24vdc which is powered thru term 4 and 5 hope this helps i see im a bit late