Elevator Forum

Notifications
Clear all

Infrared Edge

21 Posts
13 Users
0 Reactions
38.7 K Views
(@bilys22)
Eminent Member
Joined: 17 years ago
Posts: 15
Topic starter   [#14482]
Just a quick question/opinion. We have a Janus "Panacomb" infrared edge on our existing elevator. According to the elevator company it needs to be replaced. We have a full service maintenance contract which should cover replacing this replacement. However our elevator company claims that this edge is obsolete and wants to charge us to replace the entire unit. Does anyone have any suggestion or opinions on this?

Thanks for your help



   
Quote
 jkh
(@jkh)
Prominent Member
Joined: 17 years ago
Posts: 904

   
ReplyQuote
 ABE
(@abe)
Reputable Member
Joined: 17 years ago
Posts: 338

   
ReplyQuote
 ABE
(@abe)
Reputable Member
Joined: 17 years ago
Posts: 338

   
ReplyQuote
(@newmech)
Estimable Member
Joined: 17 years ago
Posts: 203

   
ReplyQuote
(@vatorgator)
Honorable Member
Joined: 17 years ago
Posts: 432
 
they are probably right, they can't get that "exact" edge. however there are many edges on the market that will do the same job. If they really wanted to keep you as a customer, and make you happy with there service, then they would spend the relatively small amount of money and have the service guy install it and be done with it. that is what our company would do. since they have the obsolescence clause in your contract, they will probably stick to there guns. just be aware, that all the circuitry for the unit is already there, and swapping the existing edge for a newer edge is not a big job. pay attention to the proposal, it should not be an exorbitant amount of money to install. usually if you replace a mechanical edge with a infrared edge, then you can expect to pay a full day to install, and wire in the correct nudging, and fire service circuit upgrades, this can run 2000-3000 dollars, or more, depending on the company. However just replacing a infrared edge with another infrared edge should take 2-3 hours max. good detector edge 300 dollars, couple hours to install at 270 per hour, you should be paying around 900 maybe a little less if you get a little cheaper edge and the hourly rate a little lower. good luck, if your in the los angeles area, pm me and i can get you with a reputable company that won't nickel and dime you to death.

Last edited by Vatorgator; 06/20/15 04:17 AM.


   
ReplyQuote
(@bilys22)
Eminent Member
Joined: 17 years ago
Posts: 15

   
ReplyQuote
 jkh
(@jkh)
Prominent Member
Joined: 17 years ago
Posts: 904
 
Bills,
Vator has given you good advice. Clauses such as "obsolescence" are there to protect the Elevator Contractors best interest. But in a case such as yours we would have ask the customer to pay for new edge and covered the removal and installation.

I feel it's better for customer relationships...



   
ReplyQuote
 ABE
(@abe)
Reputable Member
Joined: 17 years ago
Posts: 338

   
ReplyQuote
(@bilys22)
Eminent Member
Joined: 17 years ago
Posts: 15

   
ReplyQuote
(@rac66)
Trusted Member
Joined: 17 years ago
Posts: 68

   
ReplyQuote
(@rac66)
Trusted Member
Joined: 17 years ago
Posts: 68
 
Are they trying to sell you the one that lights up red and green? That unit is quite a bit more expensive, but that price is ridiculous.



   
ReplyQuote
(@vatorgator)
Honorable Member
Joined: 17 years ago
Posts: 432
 
like i said before, if they had to make appropriate changes for nudging and fire service etc, then this would be a close price, however changing a edge for an edge, this is way to much. even if they sent a team to do the job, which is 2 men, probably around 500 an hour, and the edge, probably around 400 with there 30% markup, that should only take 2 hours on the job, give them an hour drive time, now you are up to 3 hours x 500 , 1500 plus the edge 400, = 1900. personally i think that is excessive, as a single man can usually replace the edge,
just my 2 cents what it is worth, but 3750 for an edge. ouch.



   
ReplyQuote
(@beaupeep)
Honorable Member
Joined: 17 years ago
Posts: 316

   
ReplyQuote
(@newmech)
Estimable Member
Joined: 17 years ago
Posts: 203

   
ReplyQuote
Page 1 / 2
Share:
Scroll to Top