Elevator Forum

Notifications
Clear all

Gen2 ETP1 Fault

7 Posts
3 Users
0 Reactions
5,985 Views
(@gs264)
Trusted Member
Joined: 17 years ago
Posts: 52
Topic starter   [#30863]
We were doing a 5yr test on a 200fpm GEN2 and we now keep having a 2855 ETP1 fault at the top floor. Anyone have a newer manual they would be willing to share and any help would be most appreciated.



   
Quote
(@gs264)
Trusted Member
Joined: 17 years ago
Posts: 52

   
ReplyQuote
(@jluff)
Noble Member
Joined: 17 years ago
Posts: 776

   
ReplyQuote
(@gs264)
Trusted Member
Joined: 17 years ago
Posts: 52

   
ReplyQuote
(@gs264)
Trusted Member
Joined: 17 years ago
Posts: 52
Topic starter  
Still looking for help. Getting a 2922 ETSC over speed fault every run. Car is 200fpm and it looks like that’s disabled as it’s supposed to be but we still get 2922 at every floor and 2855 at terminal floors.



   
ReplyQuote
(@zeroproxy)
Eminent Member
Joined: 17 years ago
Posts: 17
 
Don’t know if you solved this but this happened to me not long ago, if your gen2 is running 1016mm/s or less (200fpm) you don’t need to have etp1-2 enables so in parameters you should have Enable ETSS chk, set it to 000 to get rid of this fault. If you have your HHT go to M-2-3-7 and look for the Parameter there



   
ReplyQuote
(@zeroproxy)
Eminent Member
Joined: 17 years ago
Posts: 17
 
Also if the parameter is disabled and you still get the fault enable your SC/SP Config and go into the setup and set ETSD1-2 to FF



   
ReplyQuote
Share:
Scroll to Top