Elevator Forum

that will disable los imput

set your los parameter to all zero's

the bypass needs to be set correctly for reliable leveling, also and if your ever have a leaking packing it could flt out again because its not bypass...

if you get the valve flt on 211 it is that the bypass is not set correctly, unplug your coils run bps all the way out, run car up and turn bps in till...

use your psi guage at the jack head to release psi, take the guage off the hose ,drain it in 5 gal buckets, its slow but works. you should make one it...

yes you do have to power down before the parameter sets

is it a 211flash or the older 211?

check and make sure the l2 led which says fail is not on in the duct,if its not the board in the controller could be bad..

yes

your fire service wires go directly back to your controller not the duct..

make sure everything is grounded good will cause problems

how many stops?

make sure the cars are not coming into the floors to fast should be under 150fpm