Notifications
Clear all
Topic starter
30/10/2022 4:33 am
After doing a pressure test on a Garaventa 5200 Elvoron it went into low oil fault. Does anyone have any information that would be helpful for resetting? Thanks in advance.
30/10/2022 9:39 pm
1. Turn on the inspection switch on the PLC
2. Check that the X12 input LED on the PLC is off
3. Press and hold the lowest floor call button (1C) on the COP for at least 3 seconds to clear the fault.
4. Return the lift to service.
2. Check that the X12 input LED on the PLC is off
3. Press and hold the lowest floor call button (1C) on the COP for at least 3 seconds to clear the fault.
4. Return the lift to service.